When a new building is constructed, the walls always remain uneven. Therefore, our company delivers Wall Putty that helps the workers to level the walls, roofs, ceilings, and other hard surfaces. It takes less time to dry for the customers or workers to apply plastic, acrylic, or water-based paints. The provided Wall Putty can be blended with water and pigments to get the desired shade.
Technical Data – Table A
PROPERTY | TYPICAL RESULTS | SINGAPORE HDS STD | TEST METHOD |
Colour | White | ||
Dry Adhesion | >1.00 N/mm2 | >=0.8N/mm2 | EN 1015-12 |
Wet Adhesion | 0.90N/mm2 | >=0.3N/mm2 | std |
Compressive Strength | 9N/mm2 | 7-12N/mm2 | EN 1015-11 |
Water Retentivity | 99.60% | >=95% | EN 1015-8 |
Water Absorption | 0.12 | <=0.13 for W2/<=0.26 for W1 | EN 1015-18 |
Technical Data – Table B
PROPERTY | TYPICAL RESULTS |
Pot life | 60 minutes |
PH | Alkaline |
Coverage | 15-20 sq ft/ kg Depending on finish of the wall |
Recommended mixing ratio | 300-400ml water/kg of wall putty |